Leach Line X dripper’s flow path is the industry’s widest allowing particles to pass easily through the dripper, virtually eliminating plugging. Drippers are welded into a wall of seamless tubing, providing added strength and durability.
The Dripperline is made with UV and acid resistant polyethylene tubing, the highest quality resins available. Available in 0.400”, 0.540”, 0.620” and 0.690” tubing diameters, 0.4, 0.5, 1.0, and 2.0 GPH dripper flow rates.
|
| Applications |
- Surface or subsurface installations.
- Heap leach applications.
- Gentle slopes.
- Reclamation projects.
 |
| Specifications |
Inside diameter:
0.400" (40 mil)
0.540" (16mm, 45 mil)
0.620" (18mm, 45 mil)
00.690" (20mm, 48 mil)
Nominal flow rates (GPH): 0.4, 0.5, 1.0, 2.0
Common spacings: 18", 24", 30", 36", 42"
Maximum operating pressure: 45 psi
Recommended filtration: 120 mesh
|
| Product Advantages |
- The position of the filter inlet to the dripper draws cleaner water or solution from the center of the flow path - reducing the risk of clogging.
- Constructed of durable polyethylene tubing.
- Seamless, one-piece construction prevents damage to dripper's flow path during installation and retrieval.
- Non-pressure compensating.
- UV and acid resistant.
- No clamps required below 35 psi.
- Lowest co-efficiency of variation (CV) in the industry, ‹ 0.03.
- Most widely used in the industry.
- Integral Design - Leach Line X's technology leaves no exposed drippers to be knocked off.
|
| 
|
About Netafim USA 
